wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Power consumption of various Linux ARM devices ======

All measured as current @ 5Vcc

Summary:
<code>
           mA  0   100  200  300  400  500  600
               v    v    v    v    v    v    v
RPiB+        | ############..
Cubieboard2  | #############................
RPi2B        | ##############...........
RadxaRockPro | ####################............
OrangePI PC  | #############................
RPi0[1]      | ###....
</code>

[[http://www.midwesternmac.com/blogs/jeff-geerling/raspberry-pi-zero-power|[1]]]

===== Orange Pi PC =====

openssl speed -multi 4 rsa4096: 18.1 sig/s 1025.8 vfy/s

===== Radxa Rock Pro =====

Distro: default Debian (3.0)

Idle with ethernet: 400 mA

ssh radxa "cat /dev/zero" | pv > /dev/null: 550 mA (saturates 100Mb/s ethernet)

openssl speed -multi 4 rsa4096: 640 mA (16.7 sig/s, 1034 vfy/s)

===== Raspberry Pi model B+ =====

Distro: Default Raspbian (3.12)

Idle with ethernet: 240 mA

ssh rpi "cat /dev/zero" | pv > /dev/null: 270 mA (2 MB/s)

openssl speed rsa4096: 280 mA (2 sig/s, 115 vfy/s)

===== Raspberry Pi 2 model B =====

Idle without ethernet: 0,22 A

Idle with ethernet: 0,27 A

ssh rpi "cat /dev/zero" | pv > /dev/null: 0,39 A (8 MiB/s)

openssl speed rsa4096: 0,36 A (3.3 sig/s, 207,4 vrfy/s)

openssl speed -multi 4 rsa4096: 0,50 A (13.3 sig/s, 830.1 vrfy/s)

===== Cubieboard A20 =====

Distro: Debian (3.4 with vendor patches)

Idle with ethernet: 260 mA

ssh cubie "cat /dev/zero" | pv > /dev/null: 410 mA (saturates 100Mb/s ethernet)

openssl speed -multi 2 rsa4096: 580 mA (6.5 sig/s, 405 vfy/s)

Idle, 2.5" rotating drive attached: 440 mA

Reading 2.5" drive: 640 mA seq (6 MB/s), 800 mA seek
wiki

User Tools

Site Tools

Page Tools
